Configuring Isp Domain Attributes - 3Com 4510G Configuration Manual

For the NAS, each user belongs to an ISP domain. Up to 16 ISP domains can be configured on a NAS.
If a user does not provide the ISP domain name, the system considers that the user belongs to the
default ISP domain.
Follow these steps to create an ISP domain:
To do...
Enter system view
Create an ISP domain and
enter ISP domain view
Return to system view
Specify the default ISP domain
You cannot delete the default ISP domain unless you change it to a non-default ISP domain (with
the domain default disable command) first.
If a user enters a username without an ISP domain name, the device uses the authentication
method configured for the default ISP domain to authenticate the user.

Configuring ISP Domain Attributes

Follow these steps to configure ISP domain attributes:
To do...
Enter system view
Create an ISP domain and
enter ISP domain view
Place the ISP domain to the
state of active or blocked
Specify the maximum number
of active users in the ISP
domain
Configure the idle cut function
Configure the self-service
server localization function
Use the command...
system-view
domain isp-name
quit
domain default enable
isp-name
Use the command...
system-view
domain isp-name
state { active | block }
access-limit enable
max-user-number
idle-cut enable minute
self-service-url enable
url-string
1-13
Remarks
—
Required
—
Optional
By default, the system has a default
ISP domain named system.
Remarks
—
Required
Optional
When created, an ISP domain
is in the active state by default,
and users in the domain can
request network services.
Optional
No limit by default
Optional
Disabled by default
Currently, this command is
effective only for LAN users.
Optional
Disabled by default