3Com 4510G Configuration Manual page 484

To do...
Enter user profile view
Apply the QoS policy
Return to system view
Activate the user profile
If a user profile is active, the QoS policy, except ACLs referenced in the QoS policy, applied to it
cannot be configured or removed. If the user profile is being used by online users, the referenced
ACLs cannot be modified either.
The QoS policies applied in user profile view support only the remark, car, and filter actions.
Do not apply an empty policy in user profile view because a user profile with an empty policy
applied cannot be activated.
Refer to User Profile Configuration in the QoS Volume for more information about user profiles.
Applying the QoS policy to a VLAN
You can apply a QoS policy to a VLAN to regulate traffic of the VLAN.
Follow these steps to apply the QoS policy to a VLAN:
To do...
Enter system view
Apply the QoS policy to VLANs
Use the command...
user-profile profile-name dot1x
qos apply policy policy-name
{ inbound | outbound }
quit
user-profile profile-name enable
Use the command...
system-view
qos vlan-policy policy-name
vlan vlan-id-list inbound
Remarks
Required
The configuration made in
user profile view takes effect
when the user-profile is
activated and there are online
users.
Refer to User Profile
Configuration in the QoS
Volume for more information
about user profiles.
Required
Use the inbound keyword to
apply the QoS policy to the
traffic received by the online
users. Use the outbound
keyword to apply the QoS
policy to the traffic sent by the
online users.
—
Required
Inactive by default
Remarks
—
Required