3Com 4510G Configuration Manual page 331

# Display the IP routing table of Switch B.
[SwitchB] display ip routing-table
Routing Tables: Public
Destinations : 10
Destination/Mask Proto Pre Cost
1.1.2.0/24 Static 60
1.1.3.0/24 Static 60
1.1.4.0/30 Direct 0
1.1.4.2/32 Direct 0
1.1.5.4/30 Direct 0
1.1.5.5/32 Direct 0
127.0.0.0/8 Direct 0
127.0.0.1/32 Direct 0
1.1.6.0/24 Direct 0
1.1.6.1/32 Direct 0
# Use the ping command on Host B to check reachability to Host A, assuming Windows XP runs on
the two hosts.
C:\Documents and Settings\Administrator>ping 1.1.2.2
Pinging 1.1.2.2 with 32 bytes of data:
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Reply from 1.1.2.2: bytes=32 time=1ms TTL=255
Ping statistics for 1.1.2.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
# Use the tracert command on Host B to check reachability to Host A.
[HostB] tracert 1.1.2.2
Tracing route to 1.1.2.2 over a maximum of 30 hops
1 <1 ms <1 ms
2 <1 ms <1 ms
3 1 ms <1 ms
Trace complete.
Routes : 10
NextHop
0 1.1.4.1
0 1.1.5.6
0 1.1.4.2
0 127.0.0.1
0 1.1.5.5
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
0 192.168.1.47
0 127.0.0.1
<1 ms 1.1.6.1
<1 ms 1.1.4.1
<1 ms 1.1.2.2
2-6
Interface
Vlan500
Vlan600
Vlan500
InLoop0
Vlan600
InLoop0
InLoop0
InLoop0
Vlan100
InLoop0