3Com 4510G Configuration Manual page 1004

etherStatsBroadcastPkts : 56
etherStatsUndersizePkts : 0
etherStatsFragments
etherStatsCRCAlignErrors : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67
256-511: 1 , 512-1023: 0
# Create an event to start logging after the event is triggered.
<Sysname> system-view
[Sysname] rmon event 1 log owner 1-rmon
# Configure an alarm group to sample received bytes on GigabitEthernet 1/0/1. When the received
bytes exceed the upper or below the lower limit, logging is enabled.
[Sysname] rmon alarm
falling-threshold 100 1 owner 1-rmon
[Sysname] display rmon alarm 1
Alarm table 1 owned by 1-rmon is VALID.
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables : risingOrFallingAlarm
Latest value
, etherStatsMulticastPkts : 34
, etherStatsOversizePkts : 0
: 0 , etherStatsJabbers
, etherStatsCollisions
, 128-255 : 4
, 1024-1518: 0
1 1.3.6.1.2.1.16.1.1.1.4.1
: delta
: 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
: 10(sec)
: 1000(linked with event 1)
: 100(linked with event 1)
: 2552
17-6
: 0
: 0
10 delta rising-threshold 1000 1