Figure 2-4 Set port parameters terminal window
Turn on the switch. The user will be prompted to press the Enter key if the switch successfully
completes POST (power-on self test). The prompt (such as <4510G>) appears after the user
presses the Enter key.
The username is "admin" and none of the password.
You can then configure the switch or check the information about the switch by executing
commands. You can also acquire help by type the ? character. Refer to the following chapters for
information about the commands.
Console Port Login Configuration
Common Configuration
Table 2-2
lists the common configuration of Console port login.
Table 2-2 Common configuration of Console port login
Configuration
Enter system view
Enter AUX user interface view
Console (AUX
user
interface)port
system-view
user-interface aux 0
Baud rate
speed speed-value
—
—
Optional
The default baud rate is 19,200
bps.
2-3
Description