Configuring Authentication And Authorization On The Ftp Server - 3Com 4510G Configuration Manual

To do...
Manually release the FTP
connection established with the
specified username

Configuring Authentication and Authorization on the FTP Server

To allow an FTP user to access certain directories on the FTP server, you need to create an account
for the user, authorizing access to the directories and associating the username and password with the
account.
The following configuration is used when the FTP server authenticates and authorizes a local FTP user.
If the FTP server needs to authenticate a remote FTP user, you need to configure authentication,
authorization and accounting (AAA) policy instead of the local user. For detailed configuration, refer to
AAA Configuration in the Security Volume.
Follow these steps to configure authentication and authorization for FTP server:
To do...
Enter system view
Create a local user
and enter its view
Assign a password to
the user
Assign the FTP
service to the user
Configure user
properties
Use the command...
free ftp user username
Use the command...
system-view
local-user user-name
password { simple | cipher }
password
service-type ftp
authorization-attribute { acl
acl-number | callback-number
callback-number | idle-cut
minute | level level | user-profile
profile-name | vlan vlan-id |
work-directory directory-name }
*
12-10
Remarks
Optional
Available in user view
Remarks
—
Required
No local user exists by default, and the
system does not support FTP
anonymous user access.
Required
Required
By default, the system does not
support anonymous FTP access, and
does not assign any service. If the
FTP service is assigned, the root
directory of the device is used by
default.
Optional
By default, the FTP/SFTP users can
access the root directory of the device,
and the user level is 0. You can
change the default configuration by
using this command.