Configuring Ead Fast Deployment - 3Com 4510G Configuration Manual

Configuring EAD Fast Deployment

Currently, MAC authentication and port security cannot work together with EAD fast deployment. Once
MAC authentication or port security is enabled globally, the EAD fast deployment is disabled
automatically.
Configuration Prerequisites
Enable 802.1X globally.
Enable 802.1X on the specified port, and set the access control mode to auto.
Configuration Procedure
Configuring a freely accessible network segment
A freely accessible network segment, also called a free IP, is a network segment that users can access
before passing 802.1X authentication.
Once a free IP is configured, the fast deployment of EAD is enabled.
Follow these steps to configure a freely accessible network segment:
To do...
Enter system view
Configure a freely
accessible network
segment
You cannot configure both the free IP and the 802.1X guest VLAN function.
If no freely accessible network segment is configured, a user cannot obtain a dynamic IP address
before passing 802.1X authentication. To solve this problem, you can configure a freely
accessible network segment that is on the same network segment with the DHCP server.
Use the command...
system-view
dot1x free-ip ip-address
{ mask-address | mask-length }
3-2
Remarks
—
Required
No freely accessible network segment
is configured by default.