Coordinate System - Standard Horizon HX850S Owner's Manual

7. To exit this menu and return to radio operation mode press the [ 16/9 ] key
or press the [ CLR ( MEM )] key several times.
When the display mode is set to "Navigation
Radio Setup menu (refer to section "8.1 DISPLAY"), this selection is
ignored and the GPS receiver activates with the full power mode, thus
the battery life will be shortened.

9.3 COORDINATE SYSTEM

This selection selects the Coordinate System to be shown on the HX850S
display. The default setting is "ddd mm.mmm".
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu Setup Menu" appears.
Setup Menu Setup Menu
Setup Menu
2. Press the [ ] key to select "GPS Setup
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Coordinate System Coordinate System" in the "GPS Setup
Coordinate System Coordinate System
Coordinate System
[ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select the desired Co-
ordinate System. The Coordinate System can
be select to "ddd mm ss
mm.mmm mm.mmm
mm.mmm mm.mmm mm.mmm".
6. Press the [ CALL ( ENT ) MENU ] key to store the selected
system.
7. To exit this menu and return to radio operation mode press the [ 16/9 ] key
or press the [ CLR ( MEM )] key several times.
HX850S
GPS Setup" menu.
GPS Setup GPS Setup GPS Setup
GPS Setup" menu with the
GPS Setup GPS Setup
GPS Setup
ddd mm ss", "ddd mm.mm ddd mm.mm", or "ddd
ddd mm ss ddd mm ss ddd mm.mm ddd mm.mm
ddd mm ss ddd mm.mm
NOTE
Navigation" or "GPS Status
Navigation Navigation Navigation
ddd ddd ddd
ddd
GPS Status" via the
GPS Status GPS Status GPS Status
Page 63