VENTING (Top vent conversion instructions)
NOTE: All components removed from fireplace back
vent will be re-installed for top venting.
1. Remove back cover attachment screw and
cover.
REMOVE TOP COMBUSTION AIR INTAKE & EXHAUST COLLARS
1. Remove top cover attachment screw and
cover.
4. The 6-5/8" combustion air intake cover is
attached with (4) screws. Remove screws
and cover.
REMOVE BACK VENT COLLARS
2. The 6-5/8 combustion air intake collar
is attached with (4) screws. Remove screws
and collar.
2. Remove heat shield cover attachment
screw and heat shield cover (w/ knockout).
5.
The exhaust cover is attached with (6)
screws. Remove screws and
PAGE 19
3.
The 4" exhaust collar is attached with
(6) screws. Remove screws and collars.
3.
Using a tin snips, remove center knockout
section
cover.
Remove
.