Managing Network Hdd - HIKVISION DS-7208HUHI-K1S User Manual

Initializing the HDD will erase all data on it.
The HDDs which are free of working for a long time can be enabled to sleep, thus to
decrease the power consumption of the device and extend the life of the HDDs.
Click Menu > HDD > Advanced.
Check the checkbox of Enable HDD Sleeping (by default), and the HDDs which are
free of working for a long time will be set to sleep.
Uncheck the checkbox of Enable HDD Sleeping, and the HDDs will be set to work for
all time.

14.2 Managing Network HDD

Purpose
You can add the allocated NAS or disk of IP SAN to DVR, and use it as network HDD.
Step 1 Enter the HDD Information interface.
Menu > HDD>General
Step 2 Click the Add button to enter the Add NetHDD interface, as shown in Figure
14-7.
Digital Video Recorder User Manual
Figure 14-4 HDD Status Changes to Normal
Figure 14-5 Enable HDD Sleeping
Figure 14-6 HDD Information Interface
211