Configuring Network Detection; Testing Network Delay And Packet Loss - HIKVISION ERT-F204 Series User Manual

ERT-F2xxx DVR User Manual
You can view the sending rate and receiving rate information on the interface. The traffic data is refreshed
every one second.

Configuring Network Detection

Purpose:
You can obtain the DVR's network connecting status through the network detection function, including
network delay, packet loss, etc.

Testing Network Delay and Packet Loss

Go to Menu > Maintenance > Net Detect.
Click the Network Detection tab to enter the Network Detection menu, as shown in Figure 9-21.
Enter the destination address in the Destination Address text field.
Click Test to start testing network delay and packet loss. The testing result pops up on the window. If the
testing fails, the error message box will pop up as well.
UM ERT-F2xxx 030118NA
Network Traffic Interface
Network Detection Interface
110