Configuring Network Detection; Testing Network Delay And Packet Loss; Exporting Network Packet - HIKVISION UD01394B User Manual

12.4 Configuring Network Detection

Purpose:
You can obtain network connecting status of DVR through the network detection function, including network delay,
packet loss, etc.

12.4.1 Testing Network Delay and Packet Loss

Steps:
1. Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
2. Click the Network Detection tab to enter the Network Detection interface.
3. Select a NIC to test network delay and packet loss.
4. Enter the destination address in the text field of Destination Address.
5. Click the Test button to start testing network delay and packet loss.

12.4.2 Exporting Network Packet

Purpose:
By connecting the DVR to network, the captured network data packet can be exported to USB-flash disk, SATA
and other local backup devices.
Steps:
1. Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
2. Click the Network Detection tab to enter the Network Detection interface.
3. Select the backup device from the dropdown list of Device Name.
Click the Refresh button if the connected local backup device cannot be displayed. When it fails to detect the
backup device, please check whether it is compatible with the DVR. You can format the backup device if the
format is incorrect.
4. Click the Export button to start exporting.
5. After the exporting is complete, click OK to finish the packet export.
Digital Video Recorder User Manual
Figure 12. 26 Network Detection Interface
Figure 12. 27 Export Network Packet
158