Network Configuration - NEC N8100-1220F User Manual

4-106 Configuring Your Server

Network Configuration

IMPORTANT:
Before setting the default gateway, the gateway, the server, and the
management PC must be ready to communicate.
If the default gateway is set while they are not ready to
communicate, you must cycle the power of the server after they are
ready to communicate through network.
The ports listed below are used for remote management.
If your network has a firewall, provide setting for firewall appropriately.
Module name
Remote KVM client
Mail server
WEB client
WEB client (SSL)
*1: To change the port number, select [BMC Settings] → [Alert Mail] → [E-Mail Alert Settings] →
[SMTP] → [SMTP Port Number].
*2: To change the port number, select [BMC Settings] → [WEB Server] → [WEB Server Settings] →
[HTTP Port Number].
*3: To change the port number, select [BMC Settings] → [WEB Server] → [WEB Server Settings] →
[SSL Port Number].
By clicking [Network Configuration] in the left pane of the BMC Configuration window, you will
see a window as shown below and you can make network-related settings for BMC including IP
address.
When you click [ ], the icon for editing information, in this window, the Network Configuration
window as shown below appears.
Port number Protocol
Undefined UDP
25 (*1) TCP
Undefined TCP
Undefined TCP
Direction Module name
BMC
←→
BMC
←→
BMC
←→
BMC
←→
Port number
623
Undefined
80 (*2)
443 (*3)