NEC N8100-1220F User Manual page 245

IMPORTANT:
To specify the setup parameters, the number of characters must not
exceed the limit as shown in the table below. (Double-byte
character shall be counted as two characters.)
Item
Create Users
Create Groups
NOTE: If you click [OK] in [Role of Computer] screen, the setup
automatically selects default value for the later specification to
continue the installation.
12.
Copy the modules for the optional mass storage driver.
If you want to install the optional mass storage driver, insert the floppy disk attached to
mass storage driver into the floppy disk drive and follow the message to operate the
installation.
NOTE: You can use this function only when the floppy disk drive is
attached to the system.
13.
Remove NEC EXPRESSBUILDER CD-ROM from the DVD-ROM drive according to
the message.
If you proceed the setup by using setup parameter file, remove the floppy disk from the
floppy disk drive.
Insert Windows Server 2003 CD-ROM into the DVD-ROM drive.
[Agree Software License Agreement] screen appears.
14.
Read the contents carefully and click [I agree.] or press F8 if you do agree. If you do not
agree, click [I disagree] or press F3.
IMPORTANT:
If you do not agree to this agreement, the setup terminates and
Windows Server 2003 will not be installed.
If "NetWare Gateway (and Client) Service" is specified to install,
the window to specify the details of "NetWare Gateway (and
Client) Service" pops up on the first logon. Specify the
appropriate value.
Installing the Operating System with Express Setup 5-13
Value specified
User Name
Group Name
Full Name
Explanation
Group Name
Explanation (Group Name)
Max. number
of characters
19
20
63
47
20
47