NEC N8100-1220F User Manual page 251

Installing SCSI Controller Driver (N8103-75)
To additionally install the N8103-75 in a system containing Windows Server 2003, connect the
controller and take the following steps to install the driver:
1.
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]
→ [Computer Management].
2.
Double-click [Adaptec SCSI Card 29320ALP - Ultra320 SCSI] which Device Manager
lists.
3.
Click the [Driver] tab and click [Update Driver...].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select the "Search for the best driver in these locations." and check the "Search removable
media [floppy, CD-ROM...]" check box.
6.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, and click [Next].
7.
Copying of the driver is completed, and the [Completing the Hardware Update Wizard]
dialog box below appears. Click [Finish].
Installing SCSI Controller Driver (N8103-95/N8190-126)
If you utilize SCSI controller driver (N8103-95/N8190-126), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Installing the Operating System with Express Setup 5-19