Table of Contents
Advertisement
Hot Replace
Take the following procedure to execute the Hot Replace:
1.
Take the following steps to stop the device driver used by the Hot Plug PCI board you
want to replace:
IMPORTANT:
driver of the slot (containing the PCI board) from the operating system.
Failure to do so may cause the system to fail.
To stop the device driver from the OS window:
(1)
Open [Add/Remove Hardware] in [Control Panel].
The [Add/Remove Hardware Wizard] starts.
(2)
Click on [Next].
(3)
Select [Uninstall/Unplug a device] for hardware task, then click on [Next].
Before removing a PCI board, be sure to stop the
Upgrading Your Server 9-45
Advertisement
Table of Contents
Troubleshooting
