NEC N8100-1220F User Manual page 101

Setting Up Your Server 3-25
To connect the power cord from the server to an interruptive power supply (UPS), use service
outlets on the rear of the UPS. Refer to the manual that comes with the UPS for details.
MN8142-11B
Connector for TVSS device
Outlet socket
Input breaker
Option slot
Computer interface port
Input connector Reset button for
Voltage sensitivity setting button
(NEMAL5-30P) overload prevention
When the power cord from the server to a UPS, change the BIOS setup of the server to link with
power supply from the UPS.
Change a parameter for "AC-LINK" under the Server menu of the BIOS SETUP utility. See
Chapter 4 for details.