Pci Board - NEC N8100-1220F User Manual

9-26 Upgrading Your Server

PCI Board

The server contains six slots for PCI board, and three slots for PCI Express board.
Some PCI boards support the hot-plug function by which they may be installed or removed with the
power of the server being on. Your server supports the hot-plug function if the Windows Server
2003 is used as an operating system. The PCI boards supporting the hot-plug function only include
the N8104-86 100BASE-TX Adapter and the N8104-111 100BASE-TX Adapter.
IMPORTANT:
electricity. Make sure to touch the metal frame of the server to
discharge static electricity from your body before handling the PCI
board. Do not touch the PCI board terminals or on-board parts by a bare
hand or place the PCI board directly on the desk. For static notes, see
the section "Anti-static Measures".
NOTE:
plug by its color. Hot-plug slot has the green tab (PCI slot #4 through
#9), and non-hot-plug slot has the blue tab (PCI slot #1 through #3).
The PCI board is extremely sensitive to static
The tab on the PCI board slot indicates hot-plug or non-hot-