NEC N8100-1220F User Manual page 227

No Error Message
5 UDP packet transmission failed.
6 Remote KVM console can not
activate because it is disabled.
7 Remote KVM Console is used by
other client.
8 Failed to shut down Remote KVM
Console.
9 Failed to make settings.
10 The UDP connection is closed.
System event logs (SEL) display errors
No Error Message
1 Failed to clear session event logs
of BMC.
2 Failed to acquire system event
logs.
Sensor data records (SDR) display error
No Error Message
1 Failed to acquire sensor data
records.
Field replaceable unit (FRU) information display error
No Error Message
1 Failed to acquire field replaceable
units information.
Configuring Your Server 4-123
What to do
Check the network environment and server.
If you don't find problem, contact your service
representative.
Make a remote KVM console enable.
See "Remote KVM Console" in Chapter 4.
Try again after the client has finished using Remote
KVM Console.
Use Remote KVM Console after waiting 3 or more
minutes.
Check the network environment and try again.
Contact your service representative if the error
persists.
Check the network environment and server.
If you don't find problem, contact your service
representative.
What to do
The network may be busy. Try again. If the error
persists, contact your service representative
because a failure may have occurred in BMC.
The network may be busy. Try again. If the error
persists, contact your service representative
because a failure may have occurred in BMC.
What to do
The network may be busy. Try again. If the error
persists, contact your service representative
because a failure may have occurred in BMC.
What to do
The network may be busy. Try again. If the error
persists, contact your service representative
because a failure may have occurred in BMC.