Table of Contents
Advertisement
Boot
Positioning the cursor on "Boot" shows the Boot menu which is used to set the boot priority.
The server searches for devices in the order set in this menu on booting. Finding the boot software,
the server starts the software.
The priority of the boot devices can be changed by using the ↑, ↓, +, and - keys. Move the cursor
to the desired device with the ↑ or ↓ key and change the priority with the + or - key.
IMPORTANT:
the devices as shown in the figure above.
To boot NEC EXPRESSBUILDER, set the priority of
Configuring Your Server 4-31
Advertisement
Table of Contents
Troubleshooting
