Table of Contents
Advertisement
Appendix B
Other Precautions
Transfer Rate of the On-board LAN Controller
The LAN controller on the IO board has two ports. Each port supports 10Base-T, 100Base-TX, and
1000Base-T networks and a capable of full or half duplex.
The controller can automatically detect and switch for network speed and transfer mode connected
to the HUB. However, for proper network operation, specify the "Link Speed & Duplex" value the
same as the value specified for HUB.
Server Management Software
The NEC EXPRESSBUILDER CD-ROM that comes with the server contains the NEC ESMPRO
utility.
NEC recommends that you should install the NEC ESMPRO for effective use of the reliability
enhancement features of the server.
Floppy Disk
Your server is not equipped with floppy disk drive. Use the optional USB floppy disk drive if
necessary.
Advertisement
Table of Contents
Troubleshooting
