Table of Contents
Advertisement
Saving the Dump File
Press the DUMP switch to save the dump file when an error occurs. Insert a metal pin (a
straightened large paper clip will make a substitute) into the switch hole to press the DUMP switch.
DUMP switch
Pressing the DUMP switch saves the dump file in the specified directory. (Memory dumping may
not be available when the processor stalls.)
IMPORTANT:
break. Use a pin having the length of 1 inch (25 mm) or longer.
Recovery for Windows Server 2003 x64 Editions and
Windows Server 2003
If the system fails to start by some reasons, recover the system with the recovery console. However,
recovery using this method should be performed only by system administrator or a user who has an
expert knowledge. See Online Help for details.
Do not use a toothpick or plastic stick that is easy to
Troubleshooting 8-65
25 mm or longer
Advertisement
Table of Contents
Troubleshooting
