Table of Contents
Advertisement
Name
(12) Event log
(13) AutoScan
(14) Full screen
(15) Alarm
2.2.1 Familiarizing the Buttons in PTZ Camera Controller
(6)
(7)
(8)
Name
(1) Close
(2) Setup
(3) AutoPan
(4) Focus +/-
(5) Zoom +/-
(6) Direction buttons
(7) Camera ID pane
(8) Save Camera
preset position
(9) Camera lens
speed controller
(10) Camera preset
position number
(11) Group AutoPan
Function
Show the record of activities that take place in the system. (see also
Chapter
2.2.2)
Start/Stop video screen cycle switch.
View in full screen. To return, press the right button of the mouse or ESC
on the keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to toggle
to only display one of the video in the multiple-screen mode or all.
Alert and display warning info. Only superuser can reset alarm status.
(9)
Function
Exit PTZ camera controller.
Configure PTZ cameras.
Operate the PTZ cameras automatically based on the selected camera group
preset position number.
Adjust the focus manually to produce clear image.
Zoom in and out the image.
Adjust and position the focal point of the PTZ camera.
Display the PTZ camera number that is being operated.
Save the PTZ camera preset position number. Select the camera and click the
preset position number and save it.
Adjust the moving speed of the PTZ camera lens.
Move the PTZ camera to the preset point.
Select to automatically operate PTZ camera in group.
(5)
(4)
(3)
(10)
17
Click the arrow icon to exit
from full screen display
mode
(2)
(1)
(11)
Advertisement
Table of Contents
