Manually Cutting The Media - MUTOH ValueJet VJ-1604W Operation Instructions Manual

6.1.4 Manually cutting the media

Verify the following regarding the operational condition of the product.
Step 1 :
 The operation panel displays: "Ready to print".
If changing the roll media cut position, refer to "Feeding media" and advance the roll media to the
Step 2 :
desired cut position.
Open the front cover.
Step 3 :
Place a razor blade on the media cut groove on the media guide, and cut the roll media.
Step 4 :
1

Cutting roll media is complete.
Notes

When loading the new roll media, cut the front edge of the media if it is not straight.
2 3
N° Name
1 Media guide
2 Media cut groove
3 Razor blade
74
Operation Instructions ValueJet 1604W
Chapter 6 : Handling the printer
AP-77300 – Rev 1.1 -17/09/2009,