5. Advanced User Guidebook
How to use Autoscale
The function is applied to follow-up signals automatically even if the signals change
at any time. Autoscale enables the instrument to set up trigger mode, voltage division
and time scale automatically according to the type, amplitude and frequency of the
signals.
The menu is as follows:
Function Menu
Autoscale
67
Fig.5-55 wave of Freq cursor measurement
Fig.5-56 Autoscale menu
Setting
OFF
Turn off
Autoscale.
ON
Turn on
Autoscale.
User Manual of Smart Digital Storage Oscilloscope
Instruction