User Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
How to Save and Recall a Wave Form
Press the SAVE/RCL button, you can save and call out the waveforms in the
instrument. The menu displayed in the screen is shown as Fig.5-37.
The description of the Wave Form Save Menu is shown as the following table:
Function Menu
Source
WAVE
Save
CHA
Save and Recall the Wave Form
The PDS series oscilloscope can store four waveforms, which can be displayed with
the current waveform at the same time. The stored waveform called out can not be
adjusted.
In order to save the waveform of the channel CH1 into the address A, the operation
steps should be followed:
1. Press the F1 menu selection button and choose CH1 for Source.
2. Press the F2 menu selection button and choose A as save address.
3. Press the F3 menu selection button and save the waveform.
Fig.5-37 Wave Form Save Menu
Setting
Description
CH1
CH2
Choose the wave form to be saved.
MATH OFF
A , B
Choose the address in or from which the
C , D
waveform is saved or can be get access to.
Save the wave form of the source in the
selected address.
OFF
Switch on or off the display of the stored
ON
waveform.
53