Table of Contents
Advertisement
Server Setup
This section explains the contents which must be carried out by the server side, when using a
Remote Management Feature.
Initial Setup
To use the Web server feature, change settings as shown below.
Start the NEC EXPRESSBUILDER from CD-ROM, and select [System Management] → [Set
Advanced Remote Management Card] from the Tools menu.
On the [Set Advanced Remote Management Card], select [Remote Management Console] →
[Enabled], and then select [Register].
IMPORTANT:
disabled at the shipment.
Setting of Graphics Accelerator Driver
When your server's OS is Windows
Use the driver which is installed at initial setup by Express Setup or system update.
When a server's OS is Linux
Since it may be automatic and a setup of a monitor/Driver/video memory may not be able
to be performed by composition when OS is Linux. We recommend you to use it in text
mode.
For security, the Web server feature of BMC is
Configuring Your Server 4-93
Advertisement
Table of Contents
Troubleshooting
