Setting Up Your Server - NEC N8100-1223F User Manual

Mouse
Keyboard
Device with the
serial interface
(e.g., modem)
Device with USB interface (USB2.0)
(e.g., terminal adapter)
Hub
(multiport repeater)
Device with the ICMB interface
(e.g., disk expansion unit)
IMPORTANT:
Power off the server and a peripheral device before connection.
Connecting a powered peripheral device to the powered server will
cause malfunctions and failures.
To connect a third-party peripheral device or interface cable to the
server, consult with your service representative for availability of
such a device or cable. Some third-party devices may not be used
for the server.
A leased line cannot be connected directly to the serial port
connectors.
Finally connect the provided
power cord to the receptacle.
If connecting the server to UPS,
see the explanation below.
REAR

Setting Up Your Server 3-7

Use this inlet only
when an optional
power supply unit is
additionally installed.
Printer with the
parallel interface
Network system on LAN
(connected via a hub)
Display
unit
Hub
(multiport repeater)