Table of Contents
Advertisement
9-32 Upgrading Your Server
9.
Reinstall the removed components.
10.
Turn on the power of the server. Then make sure that any error message does not appear
in POST.
If an error message appears, write down the message and review the error message list in
Chapter 8.
11.
Start the BIOS Setup Utility to set the "Reset Configuration Data" in the "Advanced"
menu to "Yes."
This is required to update the hardware configuration information. See Chapter 4 for
details.
Removal
Remove the board in the reverse procedure of the installation.
Advertisement
Table of Contents
Troubleshooting
