Configuration Wizard; Adapter Selection - NEC N8100-1223F User Manual

Configuration Wizard

Use this wizard to configure a RAID using the HDDs. The detailed explanation of this feature is
given in "Configuring Virtual Disk".

Adapter Selection

If several disk array controllers N8103-90 are installed in the server, you need to select an adapter
controlled by WebBIOS to configure each adapter. Clicking [Adapter Selection] on WebBIOS top
menu opens the [Adapter Selection] screen again.
Physical View / Logical View
If the virtual disk has been configured using the disk array controller, DG (disk group) is displayed
on WebBIOS top menu. Clicking [Physical View] displays information for HDDs in DG. Clicking
[Logical View] displays virtual disk in DG.
Events
The Events screen is used to confirm the system events.
IMPORTANT:
support Events feature.
The On Board RAID (MegaRAID ROMB) does not
Configuring Your Server 4-59