The table below shows the operation when the AC power to the server is turn off once and then on
again, depending on the setting of "AC-LINK."
System status before AC power off
Operating
Aborting (DC power being off also)
Forced shutdown
* Press the power switch continuously at least four seconds. This forcibly turns off the power.
IMPORTANT:
power source supplied from UPS when the server is connected to UPS.
Setting of AC-LINK
Stay Off
Off
Off
Off
Set this item to "Power on" in order to link the AC
Configuring Your Server 4-27
Last State
Power On
On
On
Off
On
Off
On