NEC N8100-1223F User Manual page 160

4-72 Configuring Your Server
7.
Enter YYYYY x 2 (multiply the maximum size of each DG by the number of DGs) in
"Select Size" field.
IMPORTANT:
"the maximum size of each DG allowed for the RAID level" by the
number of DGs.
8.
Click [Accept] at the lower center of the screen.
NOTE:
depending on firmware version of On Board RAID (MegaRAID
ROMB). It is not a problem in operating the system.
To enter the value of virtual disk size below, multiply
Disk Cache Policy field may be displayed as "Disable"