Nec Expressbuilder - NEC N8100-1223F User Manual

NEC EXPRESSBUILDER

The CD-ROM that comes with your server contains a setup utility called "NEC
EXPRESSBUILDER." When you have first installed the server or append features to the server,
use the NEC EXPRESSBUILDER to set up your server.
Refer to Chapter 6 for details.
The major functions of the NEC EXPRESSBUILDER are:
To install the Operating System.
"Express Setup" helps you to install Windows system. (See Chapter 5)
To diagnose the system.
NEC EXPRESSBUILDER includes the System Diagnostics to check your server. (See
Chapter 6)
To create a support disk.
Use this function to create the support disks used to boot the utilities from the floppy disk,
or the OEM floppy disk used for a manual installation of Windows. (See Chapter 6)
To update the BIOS.
Use this function to update the system BIOS or firmware of the server. (See Chapter 6)
To update the Windows System*
"Update NEC Express5800 System" in Master Control Menu (Windows-based NEC
EXPRESSBUILDER feature) updates the several resources of Microsoft Windows Server
2003, Microsoft Windows 2000. (See Chapter 6)
To install the utilities.
NEC EXPRESSBUILDER CD-ROM includes some management software for Windows
(NEC ESMPRO, NEC DianaScope and so on) and maintenance utilities for DOS (System
diagnostics, Off-line Maintenance Utility and so on).
You can install the applications for Windows from Master Control Menu and install the
utilities for DOS from Tools menu. (See Chapter 6)
To read the online documents*
You can refer to the online documents from Master Control Menu. (See Chapter 6)
NOTE:
remote computer via cross cable, modem, or LAN (remote console).
See Chapter 6 for details.
* These functions are available under Windows system.
Some features among those listed above can be used from the
General Description 2-23