Table of Contents
Advertisement
Troubleshooting 8-7
UID Lamp
The UID is located on the front and rear panel of the server. Pressing the UID switch on the front
panel turns UID lamp blue, and allows you to locate the server you're working on. Use this switch
when several servers are installed in the system.
Pressing the UID switch again turns off the UID lamp.
You can make the NEC ESMPRO Manager, NEC DianaScope, or the remote management feature
of Web server to flash the UID lamp. When you finished working, turn off the UID lamp.
UID switch
UID lamp
Attention Lamp
Attention lamp
The Attention lamp lights amber when location where an error occurred cannot be identified
automatically or errors occurred in two or more locations. Check the error log to identify the
location.
Advertisement
Table of Contents
Troubleshooting
