Table of Contents
Advertisement
4-114 Configuring Your Server
When you click [
], the icon for editing information, in this window, the HTTP Configuration
window as shown below appears.
1
2
3
4
5
6
1
Specify an HTTP port number
2
Choose enable/disable SSL communication. If you select this check box, you can make SSL
enabled settings. And, if you clear this check box, you can make SSL disabled settings.
NOTE:
allowed, it is recommended to use the HTTPS protocol, which is
encrypted.
By default, SSL is disabled.
3
Specify an SSL port number in this box.
4
In Login attempt period, specify a time period during which you can retry login if your attempt
to log in has failed.
5
In Failed login attempts, specify the number of login attempts during the period specified in
the previous step, exceeding which prompts to denial of login as specified in the following
step.
6
In Account lock period, enter a time period during which login is denied.
NOTE:
deny unauthorized login accesses that are attempted automatically.
However, they cannot prevent such accesses completely.
Unless there is any specific reason such use of SSL not being
The three configuration items mentioned above are effective to
Advertisement
Table of Contents
Troubleshooting
