Table of Contents
Advertisement
14.
Fully open the levers on both sides of VRM socket.
15.
Push the VRM straight into the socket.
When the VRM is inserted into the socket, the lever automatically closes. Push the lever
toward inside to securely close the lever.
NOTE:
Make sure the orientation of VRM. The terminal side of VRM
has a cutout to prevent the incorrect insertion.
16.
Install the components you removed previously.
17.
Start SETUP and select "Yes" for [Reset Configuration Data] on the Advanced menu.
This setting is required to change the hardware configuration data. See Chapter 4 for
details.
18.
To add one or more processors to the server in 1-processor configuration to operate the
server with more than one processor, do the procedure below:
For Windows Server 2003, change the driver of [Computer] in the device manager to
[ACPI multi-processor PC] and then update the system (see Chapter 5).
Upgrading Your Server 9-71
Advertisement
Table of Contents
Troubleshooting
