Table of Contents
Advertisement
Console Redirection
Selecting "Console Redirection" on the Server menu shows the following screen.
See the table below for the items.
Option
BIOS Redirection
Port
ACPI Redirection
Port
Baud Rate
Flow Control
Console Type
Remote Console
Reset
Parameter
[Disabled]
Serial Port A
Serial Port B
[Disabled]
Serial Port A
Serial Port B
9600
[19.2K]
38.4K
57.6K
115.2K
None
XON/XOFF
[CTS/RTS]
CTS/RTS+CD
PC ANSI
[VT100+]
VT-UTF8
[Disabled]
Enabled
Description
Selects the port to be used as the
redirection port. The parameters
specified in Peripheral Configuration
submenu is used as address and
interrupt.
Specify the I/O port address or
interrupt level used in ACPI headless
console redirection.
If [Disabled] is selected, console
redirection feature is disabled.
Specify the baud rate used for the
interface with successive hardware
consoles.
Specify the flow control method.
Specify the console type.
Specify whether the reset from remote
console is enabled or disabled.
Configuring Your Server 4-29
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
Troubleshooting
