5.25-Inch Device - NEC N8100-1223F User Manual

5.25-inch Device

The server contains two slots in which SCSI backup devices such as magnetic tape drive can be
installed.
Slot #2
Slot #1
Available Devices
The 5.25-inch device slot can contain two single-height SCSI devices, or one full-height device.
To use the 5.25-inch device, connect it to optional SCSI controller board.
Setting of SCSI ID
Refer to the manual that comes with the SCSI controller.
Setting of terminator
Set the terminator to "OFF".
IMPORTANT:
interface. To use a tape device, connect it to optional SCSI controller.
No tape device can be connected to on-board SCSI
Upgrading Your Server 9-17