NEC N8100-1223F User Manual page 216

4-128 Configuring Your Server
Field replaceable unit (FRU) information display error
No Error Message
1 Failed to acquire field replaceable
units information.
BMC configuration errors
No Error Message
1 Failed to make settings:
2 Failed to acquire BMC
Configuration:
3 Used by other software program.
Try again after a while.
4 Invalid BMC configuration file.
5 The required XML tag is not found.
6 Failed to write the file.
7 Invalid user name
8 The user name is too long
9 The password is too long.
10 Passwords are not matched.
11 Invalid HTTP port number
12 Invalid SSL port number
HTTP/SSL should not be the
13
same.
14 Invalid login attempt period
15 Invalid failed login attempts
16 Invalid account lock period
17 Invalid IP address
18 Invalid subnet mask
19 Invalid default gateway
20 Invalid DNS server IP address
21 Invalid host name
22 Invalid domain name
23 The SMTP server address is too
long.
24 Invalid SMTP port number.
What to do
The network may be busy. Try again. If the error
persists, contact your service representative
because a failure may have occurred in BMC.
What to do
Check the network environment and try again.
Contact your service representative if the error
persists.
Check the network environment and try again.
Contact your service representative if the error
persists.
Try again after a while.
The BMC configuration file may be corrupted.
Check the file.
The BMC configuration file may be corrupted.
Check the file.
The BMC configuration file is not saved successfully.
Change the location to save the file and try again.
You can use only alphanumeric characters, minus
sign (–), and underscore (_) for a user name. A
user name should be 32 characters or less.
A user name should be 32 characters or less.
Use 16 or less characters.
Again, input passwords.
You can use only numeric values.
You can use only numeric values.
The same port number can't do them. Specify
different value.
You can use only numeric values.
You can use only numeric values.
You can use only numeric values.
Use numerals and periods to specify an IP address.
Use numerals and periods to specify a subnet mask.
Use numerals and periods to specify a default
gateway.
Use numerals and periods to specify the IP address
of DNS server.
You can use only alphanumeric characters, minus
sign (–), and underscore (_) for a host name. A host
name should be 64 characters or less.
You can use only alphanumeric characters, minus
sign (–), and underscore (_) for a domain name. A
domain name should be up to 256 characters.
Specify within 256 characters.
You can use only numeric values.