NEC N8100-1223F User Manual page 110

4-22 Configuring Your Server
Security
Positioning the cursor to "Security" shows the following screen.
On the Security menu, register the Supervisor password first, then the User password. When the
User password is registered, you can access all the menu items.
Selectable only when
User Password is
registered
Selectable only when
User Password is
registered
If you press Enter with the selection of "Set Supervisor Password", such a screen as shown below
appears.
Specify the Supervisor passwords on the dialog box. Enter each of the passwords with up to seven
characters including alphanumerics and symbols.
After the Supervisor password has been registered, specify the User password in the similar way.
IMPORTANT:
Set the passwords only after OS is installed.
If you forget the passwords, contact your service representative.