Updating System; Re-Installing To The Hard Disk Which Has Been Upgraded To Dynamic Disk; Mo Device; Media Such As Dat - NEC N8100-1223F User Manual

E-2 Installing Windows Server 2003

Updating System

If you modified the Windows system, execute "Update the System" in Master Control Menu.
Re-installing to the Hard Disk which has been upgraded to Dynamic
Disk
If you want to leave the existing partition when installing the system on the hard disk upgraded to
Dynamic Disk, note the following issue:
Do not select the partition that OS had been installed as the partition to install the OS
newly.
Select "Use the current File System" for the format of OS partition.

MO Device

If you specify the file system as NTFS with MO Device connected during the installation, the file
system will not be converted normally. Disconnect MO Device and restart the installation from
the beginning.

Media such as DAT

During the OS installation, do not attach the unnecessary media for OS installation to the system,
such as DAT.

About the Upgrade to Windows Server 2003 R2

The "in-place upgrade" from Windows Server 2003 to Windows Server 2003 R2 is not
recommended because it may overwrite any files or registries, and cause unexpected impact to the
system or the applications.
If you install Windows Server 2003 R2, backup user data referring "Windows Server 2003 Clean
Installation", and reinstall Windows Server 2003 R2.
NOTE:
Windows Server 2003 which already installed to Windows Server 2003
R2.
"in-place upgrade" is to perform overwrite upgrade from