Memory Configuration - NEC N8100-1223F User Manual

4-14 Configuring Your Server

Memory Configuration

Selecting "Memory Configuration" on the Advanced menu shows the following screen.
See the table below for the items.
Option Parameter
DIMM Group Normal
#1 - #8 Not installed
Status Disabled
Memory [No]
Retest Yes
Extended 1MB
RAM Step 1KB
Every Location
[Disabled]
Online Spare [Disabled]
Memory Enabled
Memory RAS [Normal]
Feature Mirror
RAID
Hot-Add [Disabled]
Memory Enabled
Support
Description
Indicates the current memory status.
"Normal" indicates that the memory devices
operate normally.
"Disabled" indicates that one or more memory
devices are defected.
"Not Installed" indicates that no memory
devices are installed. (Display only)
Clears the DIMM group error status
information. Run this menu when the failed
DIMM(s) are replaced.
"1MB" indicates that the memory test is done in
the unit of 1MB. "1KB" indicates that the
memory test is done in the unit of 1KB.
"Every-Location" indicates that every memory
device is tested. "Disabled" indicates that only
memory initialization is done.
Select "Enabled" to enable the Online Spare
Memory feature.
Set the memory configuration. Select "Mirror" to
enable the memory mirroring function. Select
"RAID" to enable the memory RAID function.
Specify whether to use the Hot-Add Memory
feature on Windows Server 2003 Enterprise
Edition or Datacenter Edition. Select "Enabled"
to use the Hot-Add Memory feature.
Your Setting
[ ]: Factory-set