Lantronix MatchPort b/g Pro Command Reference Manual page 90

exit
host <number>
name <text>
no name
no remote address
no ssh username
protocol ssh
protocol telnet
remote address <text>
remote port <number>
show
show history
ssh username <text>
write
host 14 (tunnel-connect-host:2:14) level commands
address <text>
aes decrypt key <hexadecimal>
aes decrypt key text <text>
aes encrypt key <hexadecimal>
aes encrypt key text <text>
auto show statistics
clrscrn
default protocol
default tcp keep alive
MatchPort® b/g Pro Embedded Device Server Command Reference
Exits to the configuration level.
Change to config host level
Sets the name of the host.
<text> = name of the host.
Clears the name of the host.
Clears the remote address of the host.
Clears the SSH username associated with the host.
Sets the protocol to SSH.
Sets the protocol to Telnet.
Sets the IP address of the remote host to connect to when
this host is
selected on the login connect menu.
<text> = IP address.
Sets the remote port used to connect to the host.
<number> = port to be used.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Sets the username for logging into the host via SSH.
<text> = username.
Stores the current configuration in permanent memory.
Sets the remote host to establish tunneling connections
with.
<text> = IP address or host name of the remote host.
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
show connection statistics
Clears the screen.
Restores the default protocol as "TCP".
Restores the default 45 second connect mode TCP keep
5: Commands and Levels
90