Lantronix MatchPort b/g Pro Command Reference Manual page 133

key text <text>
no key
show
show history
write
key 3 (config-profile-security-wep-key:default_infrastructure_profile:3) level commands
apply wlan
clrscrn
exit
key <hexadecimal>
key text <text>
no key
show
show history
write
key 3 (config-profile-security-wep-key:default_adhoc_profile:3) level commands
apply wlan
clrscrn
exit
key <hexadecimal>
key text <text>
no key
show
show history
MatchPort® b/g Pro Embedded Device Server Command Reference
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
Sets key.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
Removes key.
Shows the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Clears the screen.
Exits to the next higher level.
Sets key.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
Sets key.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
Removes key.
Shows the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Clears the screen.
Exits to the next higher level.
Sets key.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
Sets key.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
Removes key.
Shows the current configuration.
Displays the last 20 commands entered during the current
5: Commands and Levels
133