Table 5-1 Commands And Levels - Lantronix MatchPort b/g Pro Command Reference Manual

•
accept (tunnel-accept:2) level commands
accept mode always
accept mode any character
accept mode disable
accept mode modem control asserted
accept mode modem emulation
accept mode start character
aes decrypt key <hexadecimal>
aes decrypt key text <text>
aes encrypt key <hexadecimal>
MatchPort® b/g Pro Embedded Device Server Command Reference
•
host 3 (tunnel-connect-host:2:3)
•
host 4 (tunnel-connect-host:2:4)
•
host 5 (tunnel-connect-host:2:5)
•
host 6 (tunnel-connect-host:2:6)
•
host 7 (tunnel-connect-host:2:7)
•
host 8 (tunnel-connect-host:2:8)
•
host 9 (tunnel-connect-host:2:9)
•
host 10 (tunnel-connect-host:2:10)
•
host 11 (tunnel-connect-host:2:11)
•
host 12 (tunnel-connect-host:2:12)
•
host 13 (tunnel-connect-host:2:13)
•
host 14 (tunnel-connect-host:2:14)
•
host 15 (tunnel-connect-host:2:15)
•
host 16 (tunnel-connect-host:2:16)
•
disconnect (tunnel-disconnect:2)
•
modem (tunnel-modem:2)
•
packing (tunnel-packing:2)
•
serial (tunnel-serial:2)
xml (xml)

Table 5-1 Commands and Levels

Enables the tunneling server to always accept tunneling
connections.
Enables the tunneling server to accept tunneling connec-
tions only when a
character is received through the corresponding line (seri-
al port).
Disables accept mode tunneling.
Enables the tunneling server to accept tunneling connec-
tions when the modem
control pin is asserted.
Enables modem emulation for accept mode tunneling.
Enables accept mode tunneling when the configured start
character
is received on the line.
Sets the accept tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
Sets the accept tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
Sets the accept tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
5: Commands and Levels
47