Lantronix MatchPort b/g Pro Command Reference Manual page 152

clrscrn
default dtr
dtr asserted while connected
dtr continuously asserted
dtr truport
dtr unasserted
exit
show
show history
write
server (ssh-server) level commands
authorized user <username> <password>
clrscrn
delete all authorized users
delete authorized user <username>
exit
host generate dsa 1024
host generate dsa 512
host generate dsa 768
host generate rsa 1024
host generate rsa 512
host generate rsa 768
host keys
no host dsa
no host rsa
show
show authorized user <username>
show history
show host dsa
show host rsa
write
smtp (config-smtp) level commands
clrscrn
default relay port
exit
no relay address
relay address <text>
relay port <number>
show
show history
write
MatchPort® b/g Pro Embedded Device Server Command Reference
Clears the screen.
Restores default DTR control, asserted while connected.
Asserts DTR whenever a connect or accept mode tunnel
connection is active.
Asserts DTR regardless of any connections.
Asserts DTR to match remote DSR when connected via
Telnet.
Does not assert DTR.
Returns to the tunnel level.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
Sets authorized username, password, and optionally RSA
and/or DSA public keys
Clears the screen.
Removes all authorized users
Remove an authorized user
Exits to the ssh level.
Generate DSA public and private keys
Generate DSA public and private keys
Generate DSA public and private keys
Generate RSA public and private keys
Generate RSA public and private keys
Generate RSA public and private keys
Sets RSA or DSA public and/or private keys
Removes DSA public and private keys
Removes RSA public and private keys
Show SSH Server settings
Show information for an authorized user
Displays the last 20 commands entered during the current
CLI session.
Show full DSA public key
Show full RSA public key
Stores the current configuration in permanent memory.
Clears the screen.
Restores the SMTP relay port to its default.
Exits to the configuration level.
Removes the SMTP relay address.
Sets an SMTP relay address to direct all outbound email
messages through
a mail server.
Sets the SMTP relay port.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
5: Commands and Levels
152