Lantronix MatchPort b/g Pro Command Reference Manual page 158

tunnel <line>
write
terminal network (config-terminal:network) level commands
break duration <milliseconds>
clrscrn
default break duration
default terminal type
echo disable
echo enable
exit
exit connect menu disable
exit connect menu enable
line <line>
login connect menu disable
login connect menu enable
lpd <line>
no send break
ppp <line>
preview connect menu
send break <control>
show
show history
terminal <line>
terminal network
terminal type <text>
tunnel <line>
MatchPort® b/g Pro Embedded Device Server Command Reference
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be con-
figured.
Stores the current configuration in permanent memory.
Sets how long a break should last when it is being sent to
the line.
<milliseconds> = number of milliseconds.
Clears the screen.
Restores the break duration to the default value (500 ms).
Sets the default terminal type, "UNKNOWN".
Disables echoing of characters received on the line back
to the line.
Enables echoing of characters received on the line back
to the line.
Exits to the configuration level.
On the login connect menu, removes the menu item allow-
ing the user to exit
to the CLI.
On the login connect menu, inserts the menu item allow-
ing the user to exit
to the CLI.
Enters the line level.
<line> = number of the line (serial port) to be configured.
Disables the login connect menu, so a user will get the
CLI immediately
after logging in.
Enables the login connect menu, so a user will get the
menu rather than the
CLI immediately after logging in.
Enters the configure lpd level.
<line> = number of the line (lpd serial port) to be config-
ured.
Removes the configured send break character.
Enters the serial line PPP level.
Shows the layout of the connect menu with current set-
tings.
Sets the optional send break character.
<text> = the character.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be con-
figured.
Enters the configure-terminal level for the network.
Sets the terminal type.
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be con-
5: Commands and Levels
158