Lantronix MatchPort b/g Pro Command Reference Manual page 86

protocol ssh
protocol ssl
protocol tcp
protocol tcp aes
protocol telnet
protocol udp
protocol udp aes
show
show history
show statistics
ssh username <text>
tcp keep alive <milliseconds>
validate certificate disable
validate certificate enable
vip disable
vip enable
vip name <text>
write
host 12 (config-host:12) level commands
clrscrn
default protocol
default remote port
exit
host <number>
name <text>
no name
no remote address
no ssh username
protocol ssh
protocol telnet
remote address <text>
remote port <number>
show
show history
MatchPort® b/g Pro Embedded Device Server Command Reference
Uses SSH protocol for connect mode tunneling.
Uses SSL protocol for connect mode tunneling.
Uses TCP protocol for connect mode tunneling.
Uses TCP protocol with AES encryption for connect mode
tunneling.
Uses Telnet protocol (with IAC) for connect mode tunnel-
ing.
Uses UDP protocol for connect mode tunneling.
Uses UDP protocol with AES encryption for connect mode
tunneling.
Shows the current configuration.
Displays the last 20 commands entered during the current
CLI session.
show connection statistics
Sets the SSH user name for use when establishing tun-
neling connections
with other devices.
<text> = SSH user name.
Enables TCP keep alive for connect mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
Skips verification of the server certificate when connect-
ing.
Requires verification of the server certificate when con-
necting.
Makes connections using the specified Address.
Makes connections using the VIP name.
Sets the VIP name.
Stores the current configuration in permanent memory.
Clears the screen.
Restores the default value of the protocol (Telnet).
Sets the remote port (used to connect to the host) to the
default value,
which depends on the selected protocol.
Exits to the configuration level.
Change to config host level
Sets the name of the host.
<text> = name of the host.
Clears the name of the host.
Clears the remote address of the host.
Clears the SSH username associated with the host.
Sets the protocol to SSH.
Sets the protocol to Telnet.
Sets the IP address of the remote host to connect to when
this host is
selected on the login connect menu.
<text> = IP address.
Sets the remote port used to connect to the host.
<number> = port to be used.
Displays the current configuration.
Displays the last 20 commands entered during the current
5: Commands and Levels
86