Lantronix MatchPort b/g Pro Command Reference Manual page 77

ssh username <text>
write
host 10 (tunnel-connect-host:2:10) level commands
address <text>
aes decrypt key <hexadecimal>
aes decrypt key text <text>
aes encrypt key <hexadecimal>
aes encrypt key text <text>
auto show statistics
clrscrn
default protocol
default tcp keep alive
exit
no address
no aes decrypt key
no aes encrypt key
no port
no ssh username
no tcp keep alive
no vip name
port <number>
protocol ssh
protocol ssl
protocol tcp
protocol tcp aes
MatchPort® b/g Pro Embedded Device Server Command Reference
Sets the username for logging into the host via SSH.
<text> = username.
Stores the current configuration in permanent memory.
Sets the remote host to establish tunneling connections
with.
<text> = IP address or host name of the remote host.
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
show connection statistics
Clears the screen.
Restores the default protocol as "TCP".
Restores the default 45 second connect mode TCP keep
alive timeout.
Exits to the next higher level.
Removes the remote host address used to establish tun-
neling connections.
Removes the connect tunnel AES decrypt key.
Removes the connect tunnel AES encrypt key.
Removes the remote port used to establish tunnel con-
nections.
Removes the SSH user name.
Disables the connect mode TCP keep alive timeout.
Removes the VIP name.
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
Uses SSH protocol for connect mode tunneling.
Uses SSL protocol for connect mode tunneling.
Uses TCP protocol for connect mode tunneling.
Uses TCP protocol with AES encryption for connect mode
tunneling.
5: Commands and Levels
77