Lantronix MatchPort b/g Pro Command Reference Manual page 145

verbose response enable
write
modem (tunnel-modem:1) level commands
clrscrn
connect string <text>
default incoming connection
default response type
display remote ip disable
display remote ip enable
echo commands disable
echo commands enable
echo pluses disable
echo pluses enable
error unknown commands disable
error unknown commands enable
exit
incoming connection automatic
incoming connection disabled
incoming connection manual
no connect string
reassert
response type numeric
response type text
show
show history
show status
verbose response disable
verbose response enable
write
packing (tunnel-packing:2) level commands
clrscrn
default packing mode
default send character
default threshold
default timeout
exit
no trailing character
packing mode disable
packing mode send character
MatchPort® b/g Pro Embedded Device Server Command Reference
Sends Modem Response Codes out on the Serial Line.
Stores the current configuration in permanent memory.
Clears the screen.
Sets the CONNECT string used in modem emulation.
<string> = connect string.
Default disables incoming network connections.
Default uses text type responses.
The incoming RING has nothing following it.
The incoming RING is followed by the IP address of the
caller.
Does not echo modem commands.
Echoes modem commands.
Does not echo the +++ characters when entering modem
command mode.
Echoes the +++ characters when entering modem com-
mand mode.
Returns OK on unknown AT commands.
Returns an error upon unknown AT commands.
Returns to the tunnel level.
Automatically answer incoming network connections.
Disable incoming network connections.
Wait for an ATA command before answering an incoming
network connection.
Removes optional CONNECT string information for mo-
dem emulation.
Asserts tunnel modem status with current configured val-
ues.
Uses numeric type responses.
Uses text type responses.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays tunnel modem status.
Does not send Modem Response Codes.
Sends Modem Response Codes out on the Serial Line.
Stores the current configuration in permanent memory.
Clears the screen.
Sets to default packing mode, which is "Disable"
Removes the send character for packing mode.
Restores the default threshold.
Restores the default packing mode timeout.
Returns to the tunnel level.
Removes the trailing character for packing mode.
Disables packing. Data is sent to the network when re-
ceived.
Sets packing mode to accumulate data and transmit it
upon receiving the
configured send character on the line (serial port).
5: Commands and Levels
145